Quality goes beyond everything, Service makes the future
Your location：Home > Production & Installation & After Sales > Factory
A High-quality Brand
professional R & D team, dozens of professional production lines
global classic logs direct harvesting, supply guaranteed
professional equipment + professional workers + classic technology, efficiency and precision guaranteed
non-standard size, color, LOGO and other personalized production
self-management, the quality, quantity and the cost effectiveness guaranteed
1. Better stability and plasticity 2. Large cross-section and large-sized products 3. Grading treatment, higher strength 4. Professional wood protection measures 5. Kiln-drying treatment to avoid cracks as much as possible 6. Good environmental adaptability 7. Open cycle pressure, separate milling, no misalignment of finger joints
Function: The boards are placed in the drying kiln for drying, so that the moisture content of the wood reaches the moisture content range required for production.
Function: To equalize the moisture content of the dried wood.
Function: Drying the wood to the required moisture content for processing
Function: To classify the stress of the wood, to determine the strength of the wood, and to use the wood in a rational way.
Function: Automatic removal of defective parts and cracks in boards marked by the wood preferred scanner or professional operators.
Function: Milling, gluing and finger-joining of boards or squares of different lengths to form slats of unlimited lengths, which are then cut to the required length.
Function: The slats are stacked in piles for curing of glue for the next step of processing.
Function: The finger-joined slats are planed on all sides to obtain a gluing surface that meets the quality requirements.
Function: Apply glue to one side of the slats to prepare for pressing.
Function: After the slats are glued, they are put into the pressing machine and pressed with the corresponding pressure and specific glue at the specified time.
Function: The slats are processed on both sides or all four sides, deep processed according to the requirements, and ready for transportation according to the customer’s order.
Function: To protect the finished flooring from moisture and pollution in the transportation process.
Function: Transport is usually by truck, depending on the floor size as far as possible . Special transport is required for non-standard size floors.
Make a call
Add WeChat
